Clauson–Kaas pyrrole synthesis using diverse catalysts: a transition from conventional to greener approach

• Dileep Kumar Singh and
• Rajesh Kumar

Beilstein J. Org. Chem. 2023, 19, 928–955, doi:10.3762/bjoc.19.71

• adjacent strong Lewis acid sites, and the acidity of these Lewis acid sites is due to the inductive effect of sulfate on the metallic cation. Therefore, this nano-sulfated titanium dioxide acts as a new type of Lewis acid catalyst. Intermediate A was first formed by reaction of the catalyst with 2,5-DMTHF

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• this specific metal are highly desirable. Titanium is well known to be used as titanium dioxide, a powerful photocatalyst present in inks [61][62] and sunscreens [63][64]. As a catalyst, it can be used, for example, in polymerization methods to synthesize polypropylene [65]. With regard to C–H

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

• photocatalytic decomposition of water on illuminated titanium dioxide (TiO2) electrodes in 1972 [27]. This critical report began the field of semiconductor HPC, and in combination with the development of organic electronics, established fundamental principles that still underpin much of the cutting-edge

Learning from B₁₂ enzymes: biomimetic and bioinspired catalysts for eco-friendly organic synthesis

• Keishiro Tahara,
• Ling Pan,
• Toshikazu Ono and
• Yoshio Hisaeda

Beilstein J. Org. Chem. 2018, 14, 2553–2567, doi:10.3762/bjoc.14.232

• 1 by replacing reductases with semiconductor photosensitizers and molecular photosensitizers. For example, we reported an ultraviolet-light-driven system using titanium dioxide (TiO2) semiconductor [95][96][97][98][99][100][101]. The conductive band electron of TiO2 (Ered = −0.5 V vs NHE in neutral

Photocatalytic formation of carbon–sulfur bonds

• Alexander Wimmer and
• Burkhard König

Beilstein J. Org. Chem. 2018, 14, 54–83, doi:10.3762/bjoc.14.4

• sulfoxide. Different aryl thiols were reacted with aliphatic and aromatic alkenes, showing a reasonable functional group tolerance. In 2015, the group of Greaney substituted the transition metal photocatalysts by titanium dioxide (TiO2) nanoparticles (Scheme 7) [37]. Photoexcitation of electrons to the

Adsorption of RNA on mineral surfaces and mineral precipitates

• Elisa Biondi,
• Yoshihiro Furukawa,
• Jun Kawai and
• Steven A. Benner

Beilstein J. Org. Chem. 2017, 13, 393–404, doi:10.3762/bjoc.13.42

• osmium phosphate, neither of which has been reported in mineralogy. Likewise, horizontal comparisons across the Periodic Table are problematic, even within transition metals. For example, we found that RNA binds to natural titanium dioxide (rutile, 21% in our experiments) and iron(III) oxide (Fe2O3

Stabilization of nanosized titanium dioxide by cyclodextrin polymers and its photocatalytic effect on the degradation of wastewater pollutants

• Tamás Zoltán Agócs,
• István Puskás,
• Erzsébet Varga,
• Mónika Molnár and
• Éva Fenyvesi

Beilstein J. Org. Chem. 2016, 12, 2873–2882, doi:10.3762/bjoc.12.286

• nanosized titanium dioxide (nanoTiO2) applied in photodegradation-based procedures can be stabilized with cyclodextrins in order to obtain a new, more efficient photocatalyst for the purification of waters polluted by xenobiotics applying UV irradiation. During our work, on the one hand, we studied the

• decomposition [27][28]. Recently, various photocatalysts modified by CDs have been described. For instance, reduced graphene oxide/β-CD/titanium dioxide showed enhanced removal of phenol and Cr(VI) [29], graphene nanosheets with self-assembled nanolayer of TiO2 stabilized by β-CD resulted in improved

• photodegradation of methylene blue [24], and CD-functionalized Fe3O4/TiO2 was efficient catalyst in photodecomposition of endocrine disrupting compounds, such as bisphenol A and dibutyl phthalate [30]. Producing strong oxidizing radicals (hydroxyl and superoxide radical ions) titanium dioxide is a widely used

Solvent-free, visible-light photocatalytic alcohol oxidations applying an organic photocatalyst

• Martin Obst and
• Burkhard König

Beilstein J. Org. Chem. 2016, 12, 2358–2363, doi:10.3762/bjoc.12.229

• solvent-free photocatalysis is the application of heterogeneous, semiconducting photocatalysts, often based on titanium dioxide and other metal oxides [6][7][8]. However, to the best of our knowledge, no solvent-free visible-light driven transformation of a solid substrate applying an organic

Preparative semiconductor photoredox catalysis: An emerging theme in organic synthesis

• David W. Manley and
• John C. Walton

Beilstein J. Org. Chem. 2015, 11, 1570–1582, doi:10.3762/bjoc.11.173

• choices. It is widely accepted that titanium dioxide (TiO2) in its various mineral forms is by far the most effective and reliable. This is down to its harmlessness, low cost, high activity and stability under irradiation. TiO2 has a large band gap which lies in the UVA region of the spectrum (anatase

Adsorption mechanism and valency of catechol-functionalized hyperbranched polyglycerols

• Stefanie Krysiak,
• Qiang Wei,
• Klaus Rischka,
• Andreas Hartwig,
• Rainer Haag and
• Thorsten Hugel

Beilstein J. Org. Chem. 2015, 11, 828–836, doi:10.3762/bjoc.11.92

• unclear, which underscores how little is known about the nature of the interaction between the catechol group of DOPA and metal oxide surfaces. To determine the force of a single catechol group on titanium dioxide, we performed AFM single molecule force spectroscopy measurements with tips functionalized

• pN peak to the catechol/titanium dioxide interaction and the shoulder at 700 pN to the interaction of multiple catechols. In a next step, the hyperbranched polyglycerols (hPGs) with different amounts of catechol end groups were desorbed from TiO2. The measurements were again performed with a pulling

• groups increases the likelihood of catechol–titanium dioxide interaction. Measurements of the molecule with 8% catechol showed high desorption forces for two of the five measurements, while for the molecule with 40% catechol, three of the four measurements showed high forces. Multiple catechol–titanium

Detonation nanodiamonds biofunctionalization and immobilization to titanium alloy surfaces as first steps towards medical application

• Juliana P. L. Gonçalves,
• Afnan Q. Shaikh,
• Manuela Reitzig,
• Daria A. Kovalenko,
• Jan Michael,
• René Beutner,
• Gianaurelio Cuniberti,
• Dieter Scharnweber and
• Jörg Opitz

Beilstein J. Org. Chem. 2014, 10, 2765–2773, doi:10.3762/bjoc.10.293

• material properties towards biomedical applications the authors aim to increase adhesion to bone material by incorporating nanodiamonds into the implant surface, namely the anodically grown titanium dioxide layer. Differently functionalized nanodiamonds are characterized by infrared spectroscopy and the

• the titanium alloy surface is regulated by the pH of the electrolyte. Since the isoelectric point of these oxide layers lies between pH 4 and 4.5, the titanium dioxide surface will be negatively charged at the physiological pH of 7.4 [21]. Interactions between unmodified DND, and substrate are caused

• with O-phosphorylethanolamine revealed to be stable for 12 h. The strong phosphate attraction to titanium, even at neutral or weak basic pH, results in a firm adhesion of samples with phosphate moieties to the titanium dioxide layer [20][41]. Sample 6 possesses amino groups that build hydrogen bridges

Encapsulation of biocides by cyclodextrins: toward synergistic effects against pathogens

• Véronique Nardello-Rataj and
• Loïc Leclercq

Beilstein J. Org. Chem. 2014, 10, 2603–2622, doi:10.3762/bjoc.10.273

• nanoparticles Various nanoparticles have been successfully developed as antimicrobial agents. As an example, zinc oxide and titanium dioxide nanoparticles have been prepared by chemical and sol–gel methods [91]. Biocidal applications of these nanoparticles may lead to valuable discoveries in various fields such

An integrated photocatalytic/enzymatic system for the reduction of CO₂ to methanol in bioglycerol–water

• Michele Aresta,
• Angela Dibenedetto,
• Tomasz Baran,
• Antonella Angelini,
• Przemysław Łabuz and
• Wojciech Macyk

Beilstein J. Org. Chem. 2014, 10, 2556–2565, doi:10.3762/bjoc.10.267

• the chemical stability and photostability of photocatalysts, are also under continuous investigation for their further improvement and bring the whole reaction closer to a potential application. Conclusion Titanium dioxide modified with chromium(III) complex, [CrF5(H2O)]2−@TiO2, exhibits great ability

• Synthesis of photosensitized TiO2 The modification of TiO2 with rutin was carried out as reported in the literature [27]. A titanium dioxide powder, P25 Evonik (500 mg), was added to 10 cm3 of aqueous rutin solution (10−2 mol dm−3). The suspension was sonicated (10 minutes) and the colored precipitate was

Recent advances in transition metal-catalyzed Csp²-monofluoro-, difluoro-, perfluoromethylation and trifluoromethylthiolation

• Grégory Landelle,
• Armen Panossian,
• Sergiy Pazenok,
• Jean-Pierre Vors and
• Frédéric R. Leroux

Beilstein J. Org. Chem. 2013, 9, 2476–2536, doi:10.3762/bjoc.9.287

• iodide and generate the corresponding radical (Scheme 13). Titanium dioxide was used as heterogeneous photocatalyst in the perfluoroalkylation of α-methylstyrene with perfluorohexyl iodide by M. Yoshida et al. [120]. While the main product arose from the formal perfluoroalkylation of a methyl sp3-C–H

An overview of the synthetic routes to the best selling drugs containing 6-membered heterocycles

• Marcus Baumann and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2013, 9, 2265–2319, doi:10.3762/bjoc.9.265

• -picoline can be readily oxidised via another gas-phase protocol using a fixed-bed reactor charged with vanadium pentoxide on high surface titanium dioxide (5–50 wt % vanadium). A modification of the sequence utilises a dehydrative amminolysis (ammoxidation) to furnish the corresponding 3-cyanopyridine

Flow photochemistry: Old light through new windows

• Jonathan P. Knowles,
• Luke D. Elliott and
• Kevin I. Booker-Milburn

Beilstein J. Org. Chem. 2012, 8, 2025–2052, doi:10.3762/bjoc.8.229

• efficient irradiation of the whole reaction media; this is especially useful if the photocatalyst is solid supported. The immobilised catalyst of choice is titanium dioxide, both with and without Pt doping, due to its photochemical stability. The photocatalyst can be effectively deposited onto a

• [44], perchloroethylene [45] and 4-chlorophenol [46], mainly with a view to air and water purification [47]. The following section will focus only on synthetic applications of such reactors. Photoexcitation of titanium dioxide semiconductors leads to the promotion of an electron to the conduction band

• , leaving behind a positive hole in the valence band. Thus titanium dioxide can function either as an oxidant by donation of an electron of a reacting molecule into an electron hole, or as a reductant by the donation of an electron in the conduction band of titanium dioxide to another molecule. One

Green oxidations: Titanium dioxide induced tandem oxidation coupling reactions

• Vineet Jeena and
• Ross S. Robinson

Beilstein J. Org. Chem. 2009, 5, No. 24, doi:10.3762/bjoc.5.24

• Vineet Jeena Ross S. Robinson Department of Chemistry, University of KwaZulu-Natal, Scottsville, Pietermaritzburg, 3209, South Africa 10.3762/bjoc.5.24 Abstract The application of titanium dioxide as an oxidant in tandem oxidation type processes is described. Under microwave irradiation

• , quinoxalines have been synthesized in good yields from the corresponding α-hydroxyketones. Keywords: quinoxalines; tandem oxidation process; titanium dioxide; Introduction Titanium dioxide has found widespread industrial application ranging from whiteners in paint [1], and additives in food [2], to UV

• chemistry point of view, titanium dioxide’s main use has been to oxidize alcohols to its corresponding carbonyl derivatives which has been reported many times [8][9][10]. Titanium dioxide has also been used to synthesize dihydropyrazines [11], piperazines [12], and quinoxalines [13] although in low yields